Super-Deluxe 12 Gourd Rack (#SDGR12)
Features Stainless Steel Gourd Arms, strongest on the market!
Bundle with your favorite starling-resistant gourd.
Bundle: You can bundle your favorite starling-resistant gourds. Price changes with option chosen.
Features: It features a four-part pulley system for easy raising and lowering. The gourd arms slip easily in and out of the all-aluminum, assembled hub, which has nylon glide tabs for squeak-free operation. Also
included; twelve 3/8” high-strength stainless steel arms; 45-feet of polyester
rope; an aluminum rope cleat; and a 2-inch-square aluminum pole assembly
with a plastic pyramid pole cap and two solid 3/8" top perch rods.
Aluminum pole, aluminum ground stake, aluminum hub brackets, assembled
to aluminum angle sides using stainless steel hardware. Twelve high-strength 3/8" stainless steel gourd arms.
Dimensions: Two-inch square high-tensile strength two-piece aluminum pole and stands 14-feet above the ground when installed. Square poles are superior in strength to round martin poles.
Twelve 3/8" solid stainless steel horizontal arms. Stainless
weighs more and is stronger than the aluminum gourd arms on the "Deluxe"
gourd rack. For "Deluxe" and "K-Series" style gourd racks have a
90-degree bend on the end that slips into the hub bracket. There are
three configurations; straight that slip into the single hole on the hub
bracket, and left and right, which are paired in an adjacent side of
the hub. The horizontal gourd arms have a drilled hole at the end of
the arm. Slip your gourd onto the arm and insert your supplied
stainless hitch pin. The pin will keep your gourd from falling off.
Any plastic or natural gourd can be fitted to these horizontal-style
gourd arms. If your gourds are not already drilled front-to-back in the
upper neck, use a 13/32" drill bit to enlarge the hanging holes.
Four-part pulley system:
Each of the pulleys carries a 1/4 of the load. If your 12 gourds and
hub weigh a total of 60 pounds, you are pulling around 15 pounds.
Always wear a good pair of grippy gloves when raising or lowering any
Climbing Predator Protection: An optional pole guard (PGS or EZ2) that fits a square pole is available.
Originally designed by Creative Universe Ent., this product has been continued by the Troyer's Birds' Paradise, better than ever!
It's everything except the gourds!
Easy Assembly. Product Instructions: Super-Deluxe Instructions